Amp for Ceiling Speakers – VAIL Amp 3 – Room Package w/ 2x 8 Inch In-Ceiling Speakers

Integrate the Echo Dot into your custom-installed audio system

The innovative design of the Vail Amp 3 from Vanguard Dynamics lets you turn a wired multi-room audio system into a modern “smart” system with convenient voice control, using your 3rd-generation Amazon Echo Dot (not included) as the sound source and our VAIL Amp 3 Echo Dot amp for ceiling speakers. Its 30-watt x 2 amplifier powers your in-wall or in-ceiling speakers, for much better audio than the Dot’s internal speaker can produce. This is the Echo Dot 3rd gen amplifier for which you seek.

Multi-room audio and voice control amp for ceiling speakers

You can use multiple Vail Amps (and Echo Dots) to create a whole-home system with voice control. You can tell Alexa to play different music in each room, streaming Alexa-friendly services like Spotify® and Amazon Music Unlimited via Wi-Fi®. With an Echo Dot in each room, you get manual push-button control and voice control over the system, without having to run a lot of wire or infrared repeaters. You can even go a little bit old-school and use this amp for ceiling speakers as an intercom system.

The Vail Amp 3 mounts your Dot in an attractive in-wall dock, where it doubles as a “local” in-wall volume control for that room. You can make the installation match your decor with the included paintable trim plate. An included wall plate module contains input connections for a local source like a TV, and an output for adding a powered subwoofer.

Room Package includes a VAIL Amp 3 and a pair of 6.5″ -in-ceiling architectural speakers.

Echo Dot 3rd gen sold separately.

Product highlights:

• 2 x 30-watt stereo amplifier drives up to two pairs of speakers
• Connects to 3rd generation Amazon Echo Dot and mounts it flush in your wall
• 4-/8-ohm output switch
• Attractive single-gang wall plate with input, output, and power connections
• CAT-5 cable and 16-gauge power cable included to connect wall plate module and amplifier
• Paintable snap-on trim cover for mounting Echo Dot
• Amplifier Connections:
• 3.5mm audio input for Amazon Echo Dot
• RJ-45 connector for wall plate module
• Left and right speaker output terminals

Wall Plate Connections:

• Stereo analog RCA input
• Mono RCA analog subwoofer output
• Dimensions and Warranty:
• Amplifier: 4.9375″W x 4.9375″H x 3″D
• Amplifier cutout: 4.9375″
• Echo Dot trim plate: 6″ x 6″
• Input/output wall plate: 2.8125″W x 4.5625″H x 2.0625″D
• Warranty: 5 years
• Our 60-day money-back guarantee

Dimensions and Warranty:	• Amplifier: 4.9375"W x 4.9375"H x 3"D • Amplifier cutout: 4.9375" • Echo Dot trim plate: 6" x 6" • Input/output wall plate: 2.8125"W x 4.5625"H x 2.0625"D • Warranty: 5 years • Our 60-day money-back guarantee
What's In The Box:	• In-wall amplifier (for the Echo Dot 3rd gen) • Wall-plate jack • AC power adapter (attached 39" DC cord) • Power plug adapter • 12" AC power cord • 6.5' Power harness • 6.5' Cat5 cable • Trim-cover • 2 Screws • Owner's Manual • Cut-Out Template