Echo Dot to Amplifier VAIL Amp 3 for 3rd Generation

Integrate the Echo Dot to Amplifier with your custom-installed audio system

If you are looking to connect Echo Dot to an amplifier the Vail Amp 3 lets you do just that and turn a wired multi-room audio system into a modern “smart” system with convenient voice control, using your 3rd-generation Amazon Echo Dot (not included) as the music source. Its 30-watt x 2 amplifier powers your in-wall or in-ceiling speakers, for a much better sound experience than the Dot’s internal speaker can produce.

Multi-room audio and voice control

You can use multiple Vail Amps (and Echo Dots) to create a whole-home system with voice control. You can tell Alexa to play different music in each room, streaming Alexa-friendly services like Spotify® and Amazon Music Unlimited via Wi-Fi®. With an Echo Dot in each room, you get manual push-button control and voice control over the system, without having to run a lot of wire or infrared repeaters. You can even go a little bit old-school and use it as an intercom system.

The Vail Amp 3 mounts your Dot in an attractive in-wall dock, where it doubles as a “local” in-wall volume control for that room. You can make the installation match your decor with the included paintable trim plate when you connect you Echo Dot to amp. An included wall plate module contains input connections for a local source like a TV, and an output for adding a powered subwoofer.

Highlights

• 2 x 30-watt stereo amplifier drives up to two pairs of speakers
• Connects to 3rd generation Amazon Echo Dot and mounts it flush in your wall
• 4-/8-ohm output switch
• Attractive single-gang wall plate with input, output, and power connections
• CAT-5 cable and 16-gauge power cable included to connect wall plate module and amplifier
• Paintable snap-on trim cover for mounting Echo Dot

Product highlights:	• 2 x 30-watt stereo amplifier drives up to two pairs of speakers • Connects to 3rd generation Amazon Echo Dot and mounts it flush in your wall • 4-/8-ohm output switch • Attractive single-gang wall plate with input, output, and power connections • CAT-5 cable and 16-gauge power cable included to connect wall plate module and amplifier • Paintable snap-on trim cover for mounting Echo Dot
Amplifier Connections:	• 3.5mm audio input for Amazon Echo Dot • RJ-45 connector for wall plate module • Left and right speaker output terminals
Wall Plate Connections:	• Stereo analog RCA input • Mono RCA analog subwoofer output
Dimensions and Warranty:	• Amplifier: 4-15/16"W x 4-15/16"H x 3"D • Amplifier cutout: 4-15/16" • Echo Dot trim plate: 6" x 6" • Input/output wall plate: 2-13/16"W x 4-9/16"H x 2-1/16"D • Warranty: 5 years • Our 60-day money-back guarantee
What's In The Box:	• Vanguard Dynamics Vail Amp 3 owner's manual • In-wall amplifier (for the Echo Dot 3rd gen) • Wall-plate jack • AC power adapter (attached 39" DC cord) • Power plug adapter • 12" AC power cord • 6.5' Power harness • 6.5' Cat5 cable • Trim-cover • 2 Screws • Owner's Manual • Cut-Out Template